The magnetic field strength meter FH55 is a compact precision instrument that measures the magnetic flux density (induction) B and the magnetic field strength H in Gauss, Tesla or Ampere/Meter. The instrument is supplied with a zero field chamber and an operation manual in English language.
The FH55 can be applied in the following areas:
* Quality control of permanent magnets
* Quality control of soft magnetic components
* Quality control of magnet systems (motors, loudspeakers, magnetic clamps, couplings, etc.)
* Materials research
* Development of magnet systems
* Magnet testing
* Magnet sorting
* Material analysis
* Automated testing
* Process control
Features
* 3 ¾ - digit LC display (0...+/- 2999)
* Ranges* : 30 µT, 300 µT, 3 mT, 30 mT, 300 mT, 3 T, 30 T 300 mG, 3 G, 30 G, 300 G, 3 kG, 30 kG, 300 kG 24 A/m, 240 A/m, 2.4 kA/m, 24 kA/m, 240 kA/m, 2.4 MA/m, 24 MA/m *ranges available depend on probe type
* Frequency: DC, 30 Hz – 20 kHz (limits depend on probe type)
* Basic accuracy (without probe): DC : ± 0.3 % AC : ± 2 %
* Automatic zero probe
* Automatic and manual range selection
* Limit comparators: 2 trip points, Low/OK/High display, relay outputs (alternators)
* Relative measurement
* Filter
* Max./Min. hold
* Peak hold for pulses
* Probe temperature correction
* Probe temperature display
* Probe linearity correction
* Analog output (uncorrected)
* RS232 interface
* Large probe selection, see probe datasheet
Temperature range : for Operation +10 °C to +40 °C , for storage -40 °C to +60 °C
Power supply : 90-250 V, 50-60 Hz, 5 W max.Weight : approx. 2 kg
Width / Depth / Height : 248 mm / 180 mm / 100 mm
Success
You have added Gauss/Teslameter model FH55 with transverse probe to your quotation request.